Found 8 results

Sort by: Author Title Type [ Year  (Desc)]
Okaru AO, Abuga KO, Kamau FN, Ndwigah SN, Lachenmeier DW. "A Robust Liquid Chromatographic Method for Confirmation of Drug Stability of Azithromycin in Bulk Samples, Tablets and Suspensions." Pharmaceutics. 2017;9(1). Abstract

A simple, isocratic and robust RP-HPLC method for the analysis of azithromycin was developed, validated and applied for the analysis of bulk samples, tablets and suspensions. The optimum chromatographic conditions for separation were established as a mobile phase comprised of acetonitrile-0.1 M KH₂PO₄ pH 6.5-0.1 M tetrabutyl ammonium hydroxide pH 6.5-water (25:15:1:59 v/v/v/v) delivered at a flow rate of 1.0 mL/min. The stationary phase consisted of reverse-phase XTerra(®) (250 mm × 4.6 mm i.d., 5 µm particle size) maintained at a temperature of 43 °C with a UV detection at 215 nm. The method was found to be linear in the range 50%-150% (r² = 0.997). The limits of detection and quantification were found to be 0.02% (20 µg) and 0.078% (78 µg), respectively, with a 100.7% recovery of azithromycin. Degradation products of azithromycin in acidic and oxidative environments at 37 °C were resolved from the active pharmaceutical ingredient and thus the method is fit for the purpose of drug stability confirmation.

Okaru AO, Abuga KO, Kibwage IO, Hausler T, Luy B, Kuballa T, Rehm J, Lachenmeier DW. "Aflatoxin contamination in unrecorded beers from Kenya – A health risk beyond ethanol." Food Control. 2017;79(9):344-348.Website
Okaru AO. Development and Validation of a Liquid Chromatographic method for the Analysis of Azithromycin.; 2013. Abstract

Azithromycin is a semi-synthetic macrolide antibiotic that is active against a number of Grampositive
and Gram-negative bacteria. Azithromycin is listed in the World Health Organization
and the Ministry of Health, Kenya essential drugs list. Therefore, the quality of azithromycin
products in the market is important because of its role in management of atypical infections.
Liquid chromatography is the method of choice for the analysis of azithromycin in bulk samples
and its formulations. However, the current published liquid chromatographic methods employ
extreme conditions of pH and temperature and also expensive columns for the analysis of
In this study, a simple, isocratic, rapid, sensitive and robust reverse phase HPLC method was
developed for the analysis of azithromycin in tablets, suspensions and raw materials. The effect
of chromatographic factors including use of inorganic mobile phase buffer, pH, ion-pairing
agent, organic modifier and temperature were investigated during development. Waters XTerra®
C18 column having the dimensions of 250×4.6 mm and 5 μm particle size with mobile phase
containing a mixture of acetonitrile-0.1M KH2PO4 pH 6.5-0.1M tetrabutylammonium hydroxidewater
(25:15:1:59 % v/v/v/v) was employed to achieve separation of azithromycin and its related
substances. The pH of the buffer and ion pairing agent was brought to 6.5 using an equimolar
solution of 0.1M K2HPO4. The mobile phase was delivered at a flow rate of 1 ml/min and the
components were monitored at 215 nm while the column temperature was maintained at 43 °C.
The retention time of azithromycin was found to be about 8 min.
The proposed method was validated using ICH guidelines for the parameters of linearity,
recovery, precision, sensitivity and robustness. The method was found to be linear in the range
50-150 percent with the coefficient of determination (r2) being 0.997. The LOD and LOQ were
found to be 20 μg and 78 μg respectively. The method was found to exhibit good accuracy with
the percent recovery of azithromycin being 100.7 %. The coefficient of variation for the
repeatability and intermediate precision were within the limits prescribed by ICH.
The robustness ranges for the critical factors of pH, temperature and acetonitrile were
investigated with the aid of Statgraphics Centurion XVI. The robustness range for pH was 6-7
pH units, 22-28% v/v for acetonitrile and 41-45 °C for temperature. At 95% confidence interval,
p=0.05, acetonitrile had the biggest impact on the chromatographic parameters of the critical
peak pair of azithromycin and erythromycin A imino ether.
The degradation of azithromycin in 0.0005% v/v H2O2 was found to be second order (r2=0.994)
with a half life of 13 min. In 0.1M H3PO4 and 0.05M H3PO4, 90% of azithromycin decayed
within 10 min. In 0.025M H3PO4, the degradation was found to be first order with r2 being
0.9907 with a half life of 57.8 h.
The developed method was successfully applied in the analysis of azithromycin raw material and
twenty two commercial products obtained from retail pharmacies within the Central Business
District of the City of Nairobi. Thirteen of these products were tablets while nine were
suspensions of azithromycin. Five of the nine suspensions sampled were premixed suspensions
while the rest were dry powders for reconstitution. Three tablet brands did not meet the United
States Pharmacopoeia (2012) specifications for assay (90.0-110.0% label claim) while three of
the premixed azithromycin suspensions did not meet the USP (2012) specifications. Similarly,
one of the four dry powders for reconstitution suspensions failed to comply with the assay
The developed method is simple, robust, specific, accurate and stability indicating. It can
therefore be used by quality control laboratories in the routine analysis of azithromycin bulk
samples and formulations as well as in stability studies. The method can also be applied in post
market surveillance to monitor the quality of products in circulation and detect counterfeits.

Abuga KO, Amugune BK, Ndwigah SN, Kamau FN, Thoithi GN, Ogeto JO, Okaru AO, Nguyo JM, Kingondu OK, Mugo HN, Kibwage IO. "Quality Performance of Drugs Analyzed in the Drug Analysis and Research Unit (DARU) During the period 2006-2010." East And Central African Journal of Pharmaceutical Sciences. 2013;16(2):33-43. Abstract

During the period 2006-2010, the Drug Analysis and Research Unit analyzed 583 samples. The samples comprised of 50.6% local and 49.4% imported products. Samples were subjected to compendial or in-house specifications. The failure rate was 12.2% for local products and 14.2% for imports. Antibacterial products recorded the highest failures (21.6%) while anticancers and drugs acting on the gastrointestinal, respiratory and reproductive systems all passed in the tests performed. The failure rate for antiprotozoals, antimalarials, antifungals, anthelminthics and analgesics were 14.3%, 12.5%, 11.8%, 8.9% and 11.5 % respectively.

Maru SM, Gathu LW, Mathenge AW, Okaru AO, Kamau FN, Chepkwony HK. "In Vitro Drug Release Studies to Compare the Release of Metronidazole Topical Formulations Through Cellulose Membrane." East And Central African Journal of Pharmaceutical Sciences. 2012;15(3):57-62. Abstract

Three different topical formulations namely gel, cream and ointment, each containing 1% w/w metronidazole, were prepared and in vitro permeation studies carried out. The permeation of metronidazole from each of the topical formulations was determined using dialyzing cellulose membrane in a dissolution tester. Glycerin, a permeation enhancer, was incorporated in varying concentrations and the amount of permeated metronidazole analysed using high performance liquid chromatography. The drug release was found to be greatest in the gel formulation followed by cream and ointment preparations in that order. Incorporation of glycerine enhanced drug release profile.

UoN Websites Search